Navigation
With 6 inputs, 8 outputs and programming over usb SW1316PRO MATRIX is the newest member of Mikafon Audio Systems family providing a complete suite of signal processing with DSP and control for Commercial Audio applications. Every channels can be controlled via wall mounted panel(s). Renishaw File Services Client. The Renishaw File Services (RFS) system enables the transfer of business related files between Renishaw and their customers. If you are transferring large files or you have an unstable network connection, then the desktop version is the right choice for you. DX10 Windows 64 bit Driver Package is a software program developed by Renishaw plc. Upon being installed, the software adds a Windows Service which is designed to run continuously in the background. Manually stopping the service has been seen to cause the program to stop functing properly. CN8 Connector for safety function devices Connects a safety function device. Note: When not using the safety function, use the SERVOPACK with the safety functions jumper connector (JZSP-CVH05-E, provided as an accessory) inserted. For details on how to connect, refer to 3.2.2 Safety Function Signal (CN8) Names and Functions.
- USB driver package for PHC10-3
Navigation
Download Renishaw Plc Usb Devices Driver Updater
- USB driver package for PHC10-3
USB communication is via the USB type 'B' socket on the rear panel. The PHC10-3 is self powered and therefore takes no power from the PC bus. The PHC10-3 will switch automatically from RS232 to communicate via the USB port if a powered up cable is connected.
NOTE: ONLY one type of communications cable is to be inserted at any time. IF in USB mode and the cable is removed the PHC10-3 will assert PICS STOP.
Switches 1 to 6 have no function when operating via USB. They may be set to the default down position or left in the RS232 positions.
Switches 7, 8, 9, 11, 12 and 13 will operate as described in the Interface switches section.
To operate via the USB port the CMM PC will require the correct USB drivers to be loaded. The signed drivers are available on the zip file below. To load the drivers power up a PHC10-3 and connect to the CMM PC via a USB cable. The CMM PC operating system should recognise the new hardware and the ‘found new hardware' wizard will offer to search for the driver.
Download Renishaw Plc USB Devices Driver
To conform to USB standards a maximum cable length of 5 m may be used. If a longer distance is required a hub may be used to extend another 5 m. The maximum length of hubs / cables is 30 m. It is suggested that the PHC10-3 should not share its USB port with any high data rate device which may slow down its response time. Devices such as video cameras and disc drives for example should be avoided if possible.
- Renishaw unified USB serial driver package