Ifield is a software package pre-installed on every Icone data acquisition system from A.P. van den Berg. Soil data are recorded, shown in real-time on screen and stored in ASCII-format. Output is possible in the following formats: Gorilla, CSV, SPAS, ACI, GEF, GEO and XML. It is also possible to make a printout or send the data via email.
The system can be pre-programmed with the customer’s specifications like project name, name of the operator, name of the company etc. Also the screen layouts can be customized to customer requirements.
The software package automatically recognizes cones and click-on modules. Also calibration data are automatically exchanged from the cone.
Ifield runs under Microsoft Windows and is available in four languages: English, German, French and Dutch. Ifield has a built-in function for remote control and a built-in manual that can be accessed any time.
- A.p. Van Den Berg Icontrol (com7) Driver License
- A.p. Van Den Berg Icontrol (com7) Driver Download
- A.p. Van Den Berg Icontrol (com7) Drivers
Reliable measurement of soft soils
A learning evolution. The coronavirus pandemic is transforming global trade, the economy, and even how we work. Employees are leaving the office to work from home and personal communication has gone digital. You can deploy ownCloud in your own data center on-premises, at a trusted service provider or choose ownCloud.online, our Software-as-a-Service collaboration platform hosted in Germany. Be confident your data storage and maintenance complies with regulation. Increase security through measures like. Drivers Installer for A.P. Van den Berg Icontrol. If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link.
The vane test allows in-situ measurement of the peak, residual and remoulded undrained shear strength of soft fine-grained materials such as clay, silt and mine tailings. Once the vane instrument is at the correct depth, it measures how much force it takes to rotate the blades. The data is recorded at the surface and plots are displayed in real time for visual assessment. The undrained shear strength of the soil is calculated on the basis of this measured data. For accurate vane tests, A.P. van den Berg has developed the digital Icone Vane.
Accurate digital measurements
The digital Icone Vane comprises a down-the-hole assembly equipped with a drive motor to apply torque at depth and sensors to measure the torque required to rotate the blades. The Icone Vane is supplied with four blades sizes. The blade size is generally selected depending on the anticipated peak undrained shear strength at the target depth. To prevent damage, the drive motor and torque assembly are preconfigured to apply a maximum torque of 100 Nm.
A.p. Van Den Berg Icontrol (com7) Driver License
Adjustable rotation speed
The Icone Vane is available in two versions with the following rotation rates:
A.p. Van Den Berg Icontrol (com7) Driver Download
- Slow version: adjustable rotation speed of 0.1 to 6° per second for very accurate shear tests.
- Fast version: adjustable rotation speed of 0.2 to 12° per second for fast remoulding of the soil in situations with a low shear value.
A.p. Van Den Berg Icontrol (com7) Drivers
The rotation rate for testing can be selected within the range of each version.
An option to include a protection sleeve allows completion of various vane tests at different depths and that will increase production as it eliminates drill outs and pulling out the equipment assembly between tests.
The Icone Vane can be used with all onshore and offshore A.P. van den Berg equipment. The equipment can be used for offshore testing to a maximum water depth of 4,000 m.